Kniterate Is Coming to Tonsley: Teaching Digital Knitting

Kniterate Is Coming to Tonsley: Teaching Digital Knitting

Angelina Russo

"Your Kniterate order is confirmed."

This email arrived at 5am this morning, 4 months after I started at Flinders University and 12 years after I first started following the work of Gerard Rubio (Kniterate founder) and OpenKnit, an open-source knitting machine he designed as a school project in 2014 (Perry, n.d.). From May 2027 students in our Fashion and Costume program will have their hands on programmable knitting and with that skill, they will be able to join the national push towards local manufacturing and the global uptake of industrial knitting across fashion, sport, aerospace and medtech.

Kniterate meets Kickstarter

Kniterate's story starts where many entrepreneurial stories begin – frustration with available technologies, particularly in education. Gerard Rubio was a design student in London when he noticed fashion students wrestling with old knitting machines, while the computer-controlled machines that might have helped them sat out of reach, too big and too expensive for anyone outside industry and certainly not available to students to tinker with (Fibre2Fashion, 2017). Rubio had already built his own 3D printer from a kit, and he asked a wonderfully simple question: why couldn't knitting be as accessible as digital desktop fabrication had become for product designers (Perry, n.d.)?

His first answer was OpenKnit, and rather than guard the design, he gave it away. In October 2014 Waag in Amsterdam ran a two-day workshop with Rubio and TU Eindhoven to build the machine, then published step-by-step instructions so that anyone could make one and improve it (Waag, 2014). This is the part of the story I love most. A machine for making things was itself made in the open, by a community of makers, and that generosity still shapes how the machine is used today. I remember the quiet awakening that occurred on seeing videos from that session, hoping that one day they would become the real thing.

From OpenKnit, Rubio set out to build a machine sturdy enough for daily use. In 2015 the project was selected for HAX, the hardware accelerator in Shenzhen, and the team partnered with an industrial knitting machine manufacturer. Rubio then spent a summer inside a Chinese knitting machine factory, learning how industrial machines are built (Core77, 2017; Fashion Network, 2017); a leap from an open-source school project to an industrial factory floor.

The response was extraordinary. When Kniterate launched on Kickstarter in April 2017, backers took it to its $100,000US goal within the first hour, and within three weeks the campaign had passed $400,000US, four times its target (Kniterate, 2017). Designers, educators and makers had clearly been waiting for a machine like this. Kniterate reached the market in 2019 as a scaled-down alternative to industrial flatbed machines from manufacturers such as Shima Seiki (Carnegie Mellon University Textiles Lab, n.d.).

Mobile Makers: University of Canberra, 2015–2016

Reading Rubio's story, I recognised a version of my own. While OpenKnit was being built in Amsterdam, I was leading Mobile Makers from the Centre for Creative and Cultural Research at the University of Canberra: a consortium of academics, institutions and industry partners focused on small-scale digital fabrication (Russo, 2016). Our idea was to put a digital fabrication laboratory on the road, blending consumer-grade equipment with production-quality, mid-scale machines so that regional communities could prototype their ideas with high-end tools in their own regions (Russo, 2016).


Mobile Makers Embroidered logo. Graphics Timothy Fulton

The network behind it was remarkable as was the conceptual engagement of emerging designers Antonino Nielfi, PhD and Timothy Fulton. Investigators included Professors Florian "Floyd" Mueller and Tracy Ireland, academics from different realms and yet whose expertise was perfect for what was to become an early adoption of Industry 4.0. Partners ranged from Questacon and the Powerhouse Museum to Regional Development Australia and the University of South Australia (Russo, 2016). Our small proof-of-concept lab was launched in July 2015, and in February 2016 we presented the project to the Hon John Barilaro MP, then NSW Minister for Regional Development, Skills and Small Business, in Queanbeyan (Russo, 2016). That October the laboratory opened to the public, free of charge, in the Lovett Gallery at Newcastle City Library, where the City of Newcastle, the University of Newcastle and This Is Not Art ran workshops and digital fabrication training (City of Newcastle, 2016).

We built that pitch around personas drawn from regional life: a shopfitter laid off in 2014 who had the skills to start a business but no network, a carpenter who wanted to add digital fabrication to his trade, and a retired builder who had employed more than 150 people and wanted to pass on what he knew (Russo, 2016). Every community, we argued, is full of hidden talents and skills.

It turned out that, in those years, Rubio and the Mobile Makers team were working on the same problem from different directions: putting digital fabrication within reach of people who had been shut out of it. Ten years later, the confirmation of our very own Kniterates gives us the chance to bring that conviction home to Tonsley, in the Factory of the Future, fuelling the next generation of interdisciplinary students – and I couldn't be happier!

What the machine does

Returning to the machine itself, Kniterate is a compact, computer-controlled knitting machine that uses 7-gauge industrial needles (Fibre2Fashion, 2017). A garment is designed in software, translated into machine instructions and knitted from yarn. Unstructured garments such as scarves and beanies come off the machine ready to wear, while sweaters, pants, dresses and cardigans are knitted in panels and then assembled (Fashion Network, 2017). From the outset Rubio wanted to open clothing manufacture to people beyond a handful of large companies and highly skilled individuals, and he pitched the machine at small fashion businesses, design studios and schools (Fashion Network, 2017; Fibre2Fashion, 2017). Schools were on that list from the very beginning, and it is important to recognise that both Flinders and Swinburne have now purchased these machines for their fashion students.

Importantly, the open spirit of OpenKnit carried through. The Carnegie Mellon University Textiles Lab, led by James McCann, developed "knitout", a machine-independent file format for knitting instructions, and maintains a public backend that converts knitout files into Kniterate's own format (McCann, 2017; Carnegie Mellon University Textiles Lab, n.d.).¹ The same knitout workflow can be carried to industrial machines, so a student who learns to program a Kniterate is learning a logic that transfers to production equipment (Carnegie Mellon University Textiles Lab, n.d.). At the University of the Arts London, the Creative Computing Institute uses a Kniterate in its Smart Textiles Lab so that students can build their own knitting tools on this format, and Rubio spoke to that community in March 2026 (University of the Arts London Creative Computing Institute, 2026).

Kniterate as a teaching platform

The openness played an important role in choosing this platform. The Pathway Digital Knit Studio is a "pathway" facility built to pass on capability.² Students move step by step from hand knitting, through domestic and vintage machines, to digital design and then programmable production (Russo, 2026). In the first phase they design and fit garments in CLO 3D, export the files to DesignaKnit and knit them on pattern-reader machines, so they understand how a stitch is built before they program one (Russo, 2026).

Kniterate is the next step in that sequence, perfectly scaled for the cohorts who will use it. It's small enough for students to stand right beside it, watch every carriage pass and see a line of instruction become a row of loops. Its scale keeps cost in proportion to a teaching studio and it teaches the work flow that translates to industrial manufacture. The Studio treats industrial training as a later stage in partnership with manufacturers, but those partnerships only work if students already understand knitwear, and inclusion of Kniterate gives them that grounding. As the educational network for these machines grows, our students won't be learning in isolation; the platform is shared with peers interstate and overseas, opening up opportunities to swap files, methods and teaching resources with those programmes from day one.

Why I'm excited

For more than twenty-five years I've worked with domestic knitting machines, and much of what I know came from people who learned their craft in mills and homes, many of them migrants who brought their skills to Australia. Closer to home, it was Mum who taught me to knit. Her grandmother was a hemp weaver, machine knitting was a skill in her village, and as a child Mum ran around the floor picking up the leftover yarn.

What thrills me about Kniterate is that it carries those same needles, carriages and yarn into a digital workflow. The knowledge experienced makers hold could become directly useful to students learning to program today. Silver Fleece and Fleurieu Made have already donated linkers to the Studio, and the Brother embroidery machine that stitched the Mobile Makers logo above has gone in alongside them, so a piece of that earlier project is coming to Tonsley too. I'd love to invite experienced linkers to teach alongside the new machines.

And now there's a timetable. The Studio opens to visitors in mid December 2026, the Kniterates will be commissioned from May 2027, and we anticipate our first cohort skilled in digital design and workflow will graduate in late 2027.

Before the Kniterates arrive, the Studio will have international visitors in March 2027 when Knitwear Lab, the Dutch knitwear studio founded by Thijs Verhaar and Lyske Gais, will bring a residency and masterclass to South Australia, funded by the Embassy of the Kingdom of the Netherlands through its Cultural Cooperation programme and delivered by SAFIA with Flinders University's Factory of the Future and Seamless Australia (Riley, 2026). The residency will feature at SAFIA's circular textiles symposium and include a public studio session for designers, students and manufacturers (Riley, 2026). SAFIA Board Chair Dr Nathan James Crane described it as “two different industries from two different countries, working towards the same goal” (Riley, 2026). I can't think of a better way to warm up the Studio for its new machines!

What this means for South Australia

If you've ever wondered whether Australia could make more of its own clothing, much of the answer rests on people who can design for, program and maintain knitting machines, and those roles can be hard to fill. Tonsley was Mitsubishi Motors' assembly plant until 2008, and training these skills on the same site connects the State's manufacturing history to its next chapter. Kniterate gives students the first step in that capability. Much as Mobile Makers set out to do for regional New South Wales, it could also give local designers, small brands and researchers a place to test ideas in knit before they move to production scale, helping to build a sovereign manufacturing capability in South Australia.

None of this happens alone. My thanks go to the Flinders team for supporting this investment both conceptually and financially. I am looking forward to seeing our first cohort run files on these machines from May, and to watch every garment, swatch and experiment that follows!

Notes

¹ "Knitout" refers to a low-level file format that represents knitting machine instructions in a machine-independent way, intended as an output format for design tools and an input format for knitting machines and simulators (McCann, 2017).

² "Pathway" here refers to the Studio's structured progression from analogue and manual knitting through to fully automated operation, with industrial-scale production treated as a separately funded later stage (Russo, 2026).

References

Carnegie Mellon University Textiles Lab. (n.d.). Knitout-Kniterate. Retrieved November 13, 2026, from https://knit.work/knitout-kniterate/

City of Newcastle. (2016). Mobile Makers Newcastle: Digital fabrication laboratory [Event listing]. Newcastle City Library. http://www.newcastle.nsw.gov.au/Library/Whats-On/Calendar/Mobile-Makers-Newcastle-Digital-Fabrication-Labor

Core77. (2017). Affordable desktop CNC machines expand into textiles. https://www.core77.com/posts/64979/Affordable-Desktop-CNC-Machines-Expand-Into-Textiles

Fashion Network. (2017, April 4). Now, digital knitting machine for personalised clothing. https://in.fashionnetwork.com/news/Now-digital-knitting-machine-for-personalised-clothing,812874.html

Fibre2Fashion. (2017). Interview with Gerard Rubio: Kniterate's unique technology simplifies industrial knitting machines. https://fibre2fashion.com/interviews/face2face/gerard-rubio/kniterate/1773-1

Kniterate. (2017). Kniterate: The digital knitting machine [Kickstarter campaign updates]. Retrieved November 13, 2026, from https://www.kickstarter.com/projects/kniterate/kniterate-the-digital-knitting-machine

McCann, J. (2017). The "knitout" (.k) file format [Software specification]. Carnegie Mellon University. https://textiles-lab.github.io/knitout/knitout.html

Perry, T. S. (n.d.). Kniterate updates the knitting machine to be an easy-to-use 3-D printer for fabric. IEEE Spectrum. https://spectrum.ieee.org/updating-the-knitting-machine-to-be-an-easytouse-3-d-printer-for-fabric

Riley, A. (2026, October 29). SA fashion industry goes Dutch. CityMag. https://www.indailysa.com.au/citymag/lifestyle/2026/10/29/sa-fashion-industry-goes-dutch

Russo, A. (2016, February). Mobile Makers: A mobile digital fabrication laboratory [Presentation to the Hon John Barilaro MP, Minister for Regional Development, Minister for Skills and Minister for Small Business]. Centre for Creative and Cultural Research, University of Canberra.

Russo, A. (2026). Pathway Digital Knit Studio positioning paper (Version 9) [Internal working paper]. Flinders University.

University of the Arts London Creative Computing Institute. (2026). Material Programming Project: Talks. https://cci.arts.ac.uk/~material/projects/talks.html

Waag. (2014). Building the OpenKnit machine. https://waag.org/en/article/building-openknit-machine

Back to blog

Made on the Fleurieu